About: chem-xpert
Visible Light Degradation of Rose Bengal Dye With a Novel WO2/ZnMoO4 Nanocomposite as Photocatalyst
Introduction Heterogeneous photocatalysis has become a popular research topic in recent years. The photocatalytic activities of the nanocomposite powered by visible light have been widely recognized in the degradation of organic molecules and have...
Read MoreAnthracene and 1,8-Napthalimide Aminothiazole Hybrids: Synthesis, Antimicrobial Activity and Molecular Docking Studies
Introduction In current history, epidemiological studies have established that infections produced by pathogenic bacteria and fungi have a considerable negative impact on human health. Drug resistance was found to be on the increase, posing...
Read MoreStudies on Oxidation of Alcohols by Cerium (IV)-Dimer in Aqueous Nitric Acid
Introduction Kinetics and mechanistic studies on oxidation of various organic substrates by cerium salts have been reported in perchloric acid1,2,3,4, sulphuric acid5,6,7,8 and nitric acid9,10. Selective oxidation of substrates in the aqueous solution is...
Read MoreA Case Study on Estimation of Air Quality in Hadapsar Suburban of Pune India
Introduction The biosphere consists of biotic, abiotic components and resources under the influence of constant degradation 1. It is an active hub of interactions between the living and non-living forms of matter, such as...
Read MoreRicinus Communis Activated Charcoal Preparation, Characterization and Application for Methyl Red Adsorptive Removal
Introduction Textile effluent contain large amount of synthetic dyes. These dyes are mixed with soil and water resource that are carcinogenic, toxic and neurotoxic in nature1. Discarding the dyes in water source is a...
Read MoreInfluence of Temperature on the Rheological Behavior of Non-Additive Olive Oil
Introduction Flow is a continuous deformation of the fluid that occurs when the resultant of the forces acting on the fluid is non-zero. Historically, the classical theory of fluid dynamics has developed through theoretical...
Read MoreGadolinium and Thulium Doping to Perovskite Structured Strontium Titanates at Strontium and Titanium Sites
Introduction Nowadays, Fuel cells are emerging as a leading technology in the field of power generation owing to their better efficiency and environment friendliness. A fuel cell produces electric current via electrochemical reaction using...
Read MoreSol Gel Synthesis and Characterization of Strontium Titanates
Introduction Various types of materials have been investigated by different research groups as anode, cathode and electrolyte materials. From these, the oxides with perovskite structure draw considerable attention owing to their stability in reducing...
Read MoreStructural Attributes of Organic Compounds for UV-Spectrophotometric Determination of Dissociation Constant – A Systematic Review
Introduction The dissociation constant (pKa) is the pH at which an equal proportion of ionized and unionized species of a compound or a drug.1 Knowledge about pKa values of chemical compounds is indispensable in...
Read MoreCharacterization of Ligand N’-[(1E)-1-Phenylethylidene]-1,3-Benzothiazole-2-Carbohydrazide by Using Marvin Sketch 20.8 Software
Introduction N’-[(1E)-1-phenylethylidene]-1,3-benzothiazole-2-carbohydrazide(PEBTH) Synthesis of N’-[(1E)-1-phenylethylidene]-1,3-benzothiazole-2-carbohydrazide(PEBTH) as given in Fig 1 involves three steps (i) conversion of 2-aminothiophenol to benzothiazole -2- ethyl carboxylate by esterification (ii) conversion of ester to its hydrazide (iii) conversion of...
Read MoreIsolation, Characterization, and Anti-Cancer Activity of Kaempferol-6-methoxy7-O-glucosidefrom Lantana Camara Flowers
Introduction The universe has constituted many eco-systems in which researchers are exploring the valuable medicinal plants indigenously . The green plant is essential to all extraordinary life. The oxygen we breathe, the nutritional vitamins...
Read MoreRemoval of Cadmium, Copper and Lead from Aqueous Solution Using Activated Carbon Prepared from Avocado Kernel
Introduction Chemists and environmental engineers have long been concerned about heavy metal contamination of water. As a result of industrial and metallurgical activities that release the majority of toxic substances into the environment, heavy...
Read MoreStudy of Seasonal, Spatial Deviation and Pollution Indices of Groundwater by Tannery Activities in Vaniyambadi, Vellore District, Tamilnadu, India.
Introduction Ground water is the significant wellspring of water supply for household, water system and mechanical uses in Tamilnadu because of the regularly expanding interest to fulfill the necessities of a developing populace and...
Read MoreAnti-metal Deteriorating and Antiviral Potency of a Novel Polynuclear Schiff base Derived from Anthrone
Introduction Compounds containing a carbon-nitrogen double bond (>C=N) are classified as Schiff bases (imines) and are formed by the condensation reaction of aliphatic or aromatic carbonyl compounds, with an aliphatic or aromatic primary amine....
Read MoreSynthesis of Ce3+ Doped with Cu-Zn Ferrite Nanoparticles and Study Structural, Morphological Properties
Introduction The wide use in a variety of technologies such as magnetic sensitive storage chip, microwave base systems, electronic generator, nano material-based medicine, drug also other pharmaceutical application gives the opportunity to researcher in...
Read MoreThe Use of Natural Bee Products as Bioindicators of Environmental Pollution – The Detection of Heavy Metals
Introduction Bees and their products have been suggested as biological indicators of environmental pollution in many studies. The pollen powder collected by honey bees from flowers is known as honey bee pollen 1. Pollen...
Read MoreSecondary Metabolites Screening, in Vitro Antioxidant and Antidiabetic Activity of Marine Red Alga Botryocladia Leptopoda (J.Agardh) Kylin
Introduction The sea provides an abundance of beneficial seaweeds with biodynamic properties. More people are interested in the secondary metabolites polyphenols, carotenoids, terpenes, and alkaloids due to their antioxidant capabilities and positive impact on...
Read MoreA Review on Synthesis, Characterization and Applications of Cadmium Ferrite and its Doped Variants
Introduction Alloy chemistry has gotten a lot of attention because they were first used in 2500 BC, much before the Bronze Age1. Two or more elements, at least one of which is a metal,...
Read MoreThermo-physical Investigations of Oils, N-(2-aminoethyl)-Oleamide and Resulting Gels using TGA-DSC
Introduction The vegetable oils and fats are composed of different triacylglycerols (TAG), i.e., esters of fatty acids and glycerol. The chemical as well as physical properties of oils and fats are related to their...
Read MoreOvertone Frequencies of NO2 Using Lie Algebraic Model
Introduction The subject of the vibrational spectra of molecules is an interesting and innovative work in molecular spectroscopy. Studying the vibrational spectra of small-sized molecules at the fundamental and higher overtones aids in a...
Read MoreCharacterization of a Novel Curcumin Based Schiff Base Ligand Synthesized by Microwave Method
Introduction The Schiff base ligands are extensively attracted by researchers due to its wide applications in various fields including biochemical, analytical, medicinal and antimicrobial fields 1. Schiff base ligand unveiled a high tendency towards...
Read MoreSynthesis of Some New Acetanilide Derivatives as COX Inhibitors and assessment of Analgesic/Anti-Inflammatory Activities
Introduction Inflammation is the reaction of immune system towards damaging stimuli such as pathogens, damaged cells, poisonous substances, or irradiation and anti-inflammatory agents works by removing the harmful stimuli and starts the healing process1,2....
Read MoreResponse Surface Optimization for Simultanous Estimation of Sofosbuvir and Velpatasvir in Human Plasma Sample
Introduction The global statistics data released by WHO made a conjecture that nearly 71 million people worldwide were infected by chronic Hepatitis C and in most of them disease has been progressed to cirrhosis...
Read MoreSynthesis of Insulin Loaded Nanoparticles and their Antidiabetic Studies
Introduction Diabetes is the continual disease. Now a day’s diabetes mellitus is the widespread metabolic disease. Around 463 million humans dwelling with diabetics. In 2045 the number of suffers will increase to 700 million....
Read MoreA Facile Synthesis and Characterization of New N-P-K Fertilizer Fortified with Tri -Micronutrient Matrix and its Application for Optimal Plant Augmentation
Introduction Food security is one of the world’s big challenges with huge demand forecast. Every year a series of agricultural products, drink and food products for human consumption and animal feed are formed. Climatic...
Read MoreSynthesis and Characterization of Zincoxide Nanoparticles of Average Diameter 10nm in Aqueous Medium
Introduction It is observed that the last two decades there is an explosive growth in the field of research work of nanotechnology and nanoscience of which transition metal paid an attractive importance. Zinc is...
Read MoreConductance, Dissociation Constant and Thermodynamic Parameters Studies of Succinic Acid in Water +PC and Water + THF Medium
Introduction In continuation our earlier studies 1-3 we focused in the present studies that how succinic acid solvated in water +PC and water + THF medium. Researchers interested in different weak acids in different...
Read MoreAntimicrobial Activity and Physicochemical Analysis of Bio- Degradable Films from Cucurbita Pepo and Musa Paradisiaca
Introduction One of the foremost challenges in dry waste management is the plastic waste, which leaches out harmful chemicals inadvertently into the environment. The durability and increasing usage of plastics creates a major waste...
Read MoreModified Rate Law for Bimolecular Reactions: Applicable to Surface as well as Non-Surface Reactions
Introduction The rate law is the center of all rate expressions for non-surface reactions. The core of the rate law is embedded in kinetic theory of collisions with the assumption that fraction of collisions...
Read MoreGlyceral Trinitrate: As Potential Corrosion Protector for Mild Steel in Acid Medium Along with Paint-Coated Steel in a Saline Environment
Introduction Mild steel has excellent mechanical properties 1 and due to this property, it is used as the material of construction engineering structural material. In petroleum industries, mild steel is extensively used transmission pipelines,...
Read MoreStudy of Potential of Marine Macroalgae Biochar for Acid Dye Removal
Introduction Dyes are generally more stable and difficult to degrade because of their complex aromatic structure. 1 Dyes are used widely in various industries such as paper, plastic, leather, textile, paper, cosmetics, and pharmaceuticals....
Read MoreStudies of Substitution Effect of B2O3 on Structure and Properties of 1393 Bioactive Glass
Introduction For substituted damaged or diseased tissues used biomaterials. This is a first generation material it’s considered as a property of bio-inertness. Bio-glass by means of the character of genetic material commencement was second-hand...
Read MoreStructural, Spectral, Thermodynamic and HOMO, LUMO Analysis of 2,6 Dithenobenzene-3-enyl 3,5 Dimethyl Piperdine-4-one: A Quantum Chemical Analysis
Introduction The phenomenal developments in ab initio and density functional theory (DFT) over the last decade have made possible efficient and systematic predictions of harmonic vibrational frequencies, together with harmonic dipole strengths and rotational...
Read MoreSynthesis, Characterization and Evaluation of Biological Activities of Sn(II) Complexes of Schiff Base Incorporating Sulpha Drugs
Introduction Hugo Schiff in 1864 first reported preparation and coordination properties of Schiff bases. Schiff bases which have azomethine linkage (–CH=N–) can be synthesized by condensation of active carbonyl compounds with primary amines under...
Read MoreComparison Between Interaction of Hydrophobic-Anionic and Hydrophobic-Cationic Mixed Micellar System with Drug Ciprofloxacin
Introduction In the nonionic group of surfactants, the triblock copolymer class has received a lot of attention. The commercial trade name is pluronic or poloxamer. These amphiphilic polymers have polypropylene oxide (PPO) and polyethylene...
Read MoreBio-mediated Synthesis of Silver Nanoparticles Using Fruit Extract of Ananas Comosus L. Merrill (Pineapple)
Introduction Nanotechnology is the interesting and important field of research. It has various range of application in optics, bio-labeling, medicine, biology1, agriculture, cosmetic, defense, catalysis1-2, sensors, environmental safety, food, drug delivery3, health, biomedical4, pharmaceuticals,...
Read MoreThe Role of Atom Shadow on Sorbitol Molecules to Heal Diabetic Diseases
Introduction The consumption of sucrose as a food sweetener is now being replaced and reduced by its use. Sugar substitutes must meet the requirements, namely that they must have a sweet taste, are not...
Read MoreImpact of Heat on the Different Stages of the Production of Local Beer “Tchoukoutou” Made from Sorghum
Introduction Tchoukoutou, a local alcoholic drink produced and consumed throughout Togo, is traditionally made from sorghum. It is a short shelf life beverage that varies in quality from production to production 1. It is...
Read MoreStudy of Sorption Kinetics of Doxycycline on Ph Sensitive Hydrogel-Based Graft Copolymers of Chitosan/Arabinogalactan/Gummiarabic with Vinyl Monomers
Introduction It is known that antibiotics are widely used in modern medicine in the treatment of inflammatory diseases, destruction or inhibition of bacterial cells1,2. Doxycycline (Dox) is one of the anthracycline series of antibiotics...
Read MoreEthanolysis of Waste Cooking Oils Using KOH Catalyst
Introduction Owing to the rapid industrialization and metropolitan expansion, energy demand continues to rise. Coal, petroleum, and natural gas are the main energy sources, and due to their non-renewable origin, these energy sources are...
Read MoreRevealing the Toxicity of Chlorate through the Analysis of Molecular Interaction Using Viscosity Measurements and Apparent Molar Volumes
Introduction Lychees and longans are close family members. longans and lychees are comparable in nutritional composition. Both are minimal in calories and carbohydrates and are nil in fat. The antioxidants and fibres are abundant...
Read MoreInfluence of Solvents on the Oxidation Kinetics of Aldehydic Group Compounds by Diethyl Ammonium Chloro-Chromate
Introduction Various dichromates and halochromates have been used time to time as a slow, week and very specific oxidizing agents in the field of imitation organic chemistry1-5. Diethyl ammonium chlorochromate (DEACC) is also the...
Read MoreAnalytical Instrumentation Techniques of FT-IR, XRD, SEM, and EDX for Adsorption Methods of Ni2+ Ions Onto Low Cost Adsorbent
Introduction Pollution of heavy metals has attracted global attention due to their toxicity, hard decay and accumulation in organisms. Heavy metals accumulate in the tissues of various living organisms and as a result attach...
Read MoreDensity Study of (D (+) Mannose + Water), (D (+) Mannose + Water + Sodium Cyclamate), (D(+) Maltose Monohydrate + Water) and (D (+) Maltose Monohydrate + Water + Sodium Cyclamate) Systems at T = 298.15 K
Introduction Carbohydrate gain importance and attention of researchers because of their multifunctional and significant roles in different areas like biological reaction, industrial field, pharmaceuticals, organic synthesis, structural determination and separation. The stabilities of such...
Read MoreDistribution of Selected Dissolved and Particulate Heavy Metals in Lake Kenyir, Malaysia
Introduction A lake is a large area of water surrounded by land, which is not part of the ocean or any river but is usually drained by rivers and streams. Lake Bera, Lake Chini...
Read MoreFuture Clinical Application of β-galactosidase Stabilized by Magnesium Oxide Nanoparticles
Introduction Twenty-first century witnessed the remarkable upsurge in nanotechnology based research owing to its broader display of utilization in clinical and biotechnological applications 1. Furthermore, the current engineering techniques favor the precise synthesis of...
Read MoreKnoevenagel Condensations Catalyzed by New Oil Shale Recyclable Catalyst at Room Temperature and Assisted by Ultrasounds Irradiations
Introduction Since the first report of Knoevenagel condensation in 1895, the synthesis of their products is becoming and still guard an important position in the scale of organic transformations knowing that it is considered...
Read MoreApplication Extended Vogel -Tammann-Fulcher Equation for Soybean Oil
Introduction The exact correlation of soybean oil viscosity data is of extreme practical importance when looking for optimal filler conditions for certain applications. Although the best correlations of experimental data for temperature dependence can...
Read MoreA Review on Pyran Heterocyclic Compound as the Prosperous Scaffolds for Biological Sensor
Introduction Because of its many advantages in terms of synthetic performance and product design, the multi-component reactions mechanism for the cost-effective synthesis of pharmacologically effective heterocyclic by one-pot has gotten a lot of consideration....
Read MoreDoped Ceria Catalyst System: Catalyzing Carbon Monoxide Transformation
Introduction Ceria has received much attention from the catalyst community vis-à-vis material science community due to its high oxygen capacity, oxygen mobility, beautiful redox chemistry and wide range of acidity-basicity profile. Among CeO2/Ce2O3, TiO2/Ti2O3,...
Read MoreExtraction of the Metabolites from Medicinal plant Euphorbia leaf
Introduction Since ancient times, people have used plants as sources of chemicals, for therapeutic and recreational purposes and for poisoning 1,2. Based on the knowledge of medicinal plants human being has been investigating throughout...
Read MoreIndicator Made from Countryside Flower Petals
Introduction In connection of our previous Experiment 1, here we observed that some common flower petals acts as natural indicators in acidic and basic conditions. Negative logarithm of concentration of hydrogen ion acts as...
Read MoreStudy of Rheological Behavior of Olive Oil Used as Biodegradable Lubricant
Introduction Olive oil can be obtained by one of the following methods: chemical extraction involves treating the olives with chemicals (various organic solvents) that help separate the oil from the other components of the...
Read MoreStudy of Green Seaweed Biochar for Lead Adsorption from Aqueous Solution
Introduction With growing development, pollution levels are rising, disrupting the ecological balance and posing a health risk if not effectively handled. Acid, alkalis, anions (sulphides, sulphites, and cyanide), detergents, sewage, nutrient, and metal, toxic...
Read MoreAntioxidant and Antidiabetic Activities of Biologically Synthesized Silver Nanoparticles using Linumusitatissimum Extract
Introduction Nanoscience technology is a multidisciplinary subject and it is widely used in research areas of physics and chemistry. Various physical, chemical, and greener syntheses processes are available in nanoparticle (NPs) production. Chemical and...
Read MoreEffect of Rate and Quantum Yield of 1-alkyl-2-(arylazo) Imidazoles on the Surface of Silver Nps
Introduction Due to exceptional values and possible potential applications in technological aspects, the method of production and identification of nanostructured substances earning a lot of importance. The structure of these nano influences on its...
Read MoreCongo Red and Nigrosine Dye Degradation using Dimethyl Dioxirane as an Oxidising Agent
Introduction New, sophisticated, and low-cost ways for dealing with commercial wastewater are needed. On a variety of polluting chemical agents that are mostly found in wastewater originating from the industrial region, various separation, degradation,...
Read MoreAssessment of Water Quality Using Modified Water Quality Index and Geographical Information System in Madathukulam Taluk, Tiruppur District, Tamil Nadu, India
Introduction Due to boom in population, improper irrigation, fertilization, industries uncontrollable rise in heavy metal concentration, in past few decades, water bodies are polluted1-2. Safe drinking water is essential to humans and other life...
Read MoreSynthesis and Characterization of Lanthanum Nanoparticles by Anethum Graveolens (Dill) Leaf Extract
Introduction Nanoparticleshave specific and unique modified physical and chemical properties as compared to its macro scaled counterparts 1,2. Emergence of Nanotechnology has attracted researchers in various fields of technology and industries 3. Nanoparticles bridge...
Read MoreIsolation, Characterization of Active Constituent and Evaluation of Hepatoprotective Activity of Inula Racemosa Hook. F. Roots
Introduction The developed countries still depend on herbal traditional medicines1. Even in developing as well as developed countries, herbal drugs play an important role in curing various human ailments2. Herbal drugs are very popular...
Read MoreMethod Development and Validation for the Trace Level Quantification of Genotoxic Impurity Oseltamivir Phosphate Related Compound-a in Oseltamivir Phosphate Using LC-MS
Introduction Oseltamivir phosphate (OST) is a potent antiviral drug used for the treatment of influenza A and influenza B sold under the brand name Tamiflu. It inhibits the viral enzyme neuraminidase and prevents the...
Read MoreSynthesis and Characterization of about 20nm Gold Nanoparticles
Introduction Colloidal nanoparticles (specifically metals) are becoming more and more significant in an assortment of scientific and technical fields. The gold nanoparticles (AuNPs) are perhaps the most significant members of the metal nanoparticles groups...
Read MoreReactions of MoCl5 with 4-Methylpyridine, 2-Methylpyridine and 1-Methylimidazole in Tetrahydrofuran
Introduction Pyridine derivatives have a number of biological activities, like antimycobacterial1, antimicrobial2, 3, analgesic4, anticonvulsant5, antitumoral6, antimalarial7, antiparkinsonian8, cytotoxic9, pesticidal10, antidiabetic11, antibacterial12, inhibitory13 and receptor14 antagonists. Electron donating groups15 in pyridine derivatives increase the...
Read MoreA Validated Stability Indicating RP-HPLC Method for Quantification of Cilnidipine in Bulk and in Tablet Dosage Form
Introduction Chemically, Cilnidipine is 1,4-Dihydro-2,6-dimethyl-4-(3-nitrophenyl)-3,5-Pyridine dicarboxylic acid 2-methoxyethyl (2E)-3-phenyl-2-propenyl ester (Figure 1). It is a light yellow, crystalline powder and official in Indian Pharmacopoeia. Cilnidipine is a dihydropyridine derivative of 4th generation Ca++ channel...
Read MoreAnalysis of New Piperidine Substituted Benzothiazole Crystalline Derivatives
Introduction The benzothiazole derivatives possess superior biological and bio-physical properties such as antitumor and metabolic activities 1, antimicrobial2-5, imaging agents for β- amyloid 6 anti-cancer 7, anti-tuberculosis 8 anti-viral 9, anti-oxidant 10 and hence...
Read MoreSynthesis of some Novel Mixed Ligand Complexes of Ni(II) and their Characterization
Introduction Mixed ligand complexes of transition metal ions are of great interest for the researchers who wishes to study their coordination behavior for exploiting their properties in different fields especially in the antibacterial activity...
Read MoreSynthesis, Characterization and in Vitro Antimicrobial Studies of Ternary Mn(II) Complexes with Isatinphenylhydrazone, Glycine and 8-hydroxyquinoline
Introduction According to present scenario, ternary complexes1 have great interest of researchers owing to their importance in biological, medicinal, pharmaceutical and agricultural fields. IPH is a Schiff base2, derivative of isatin and phenylhydrazine and...
Read MoreInvestigation of Minerals Substituted Hydroxyapatite Based Nanocomposite Coated Titanium Implant for Bone Tissue Engineering Applications
Introduction In recent years, titanium-based implant materials have been subject to many surface treatment methods (acid-etch, anodizing, plasma-spray) and bioactive coatings (wollastonite, magnesium silicates, bioactive glass, and hydroxyapatite)1, 2. Furthermore, the hydroxyapatite (HA) is...
Read MoreSynthesis and Evaluation of Novel 4-Hydroxycoumarin Derivatives as Potential Anti-Microbial Agents
Introduction Inflammation is a complex phenomenon accompanied by interrelationships between humoral and cellular reactions induced by the diversity of inflammatory mediators such as toll like receptors (TLRs), interleukins (ILs), etc. The symptoms of the...
Read MoreAntibacterial Activity and DNA Binding Properties of Bivalent Metal Complexes of Cuminaldehyde Acetoylhydrazone
Introduction Hydrazones exhibit a broad spectrum of biological activities such as antibacterial1, antitubercular1, antioxidant2, antiviral3 and anticancer4 activities. Hydrazones constitute an important class of compounds for new drug development5. Hydrazones derived from acetichydrazide are...
Read MoreScreen Printing Strategy for Investigation of Spectrophotometric Properties of Modified Thick Films of Zirconium Oxide (ZrO2): Tin Oxide (SnO2) Composites
Introduction Thick film technology is more precisely and popularly called printed and fired technology. The principle of thick film technology includes the resistive, conductive, insulating pastes containing glass frit, deposited in patterns defined by...
Read MoreDesign, Synthesis and Gelation of Low Molecular Weight Organo-Gelators Derived from Oleic Acid via Amidation
Introduction Gels are unique materials. They have been known since ancient times such that their origin can be found at least Neolithic times and, ever since, they have played an important role in many...
Read MoreStructural and Electrical Conductivity Studies of PVDF-HFP Film Filled with Tio2 and Nacl for Polymer Semiconductors
Introduction Energy-source devices, for example, power modules can be ready as a choice to work on the nursery impact from fossil fuel byproducts in the absolute world1. Polymer layers as electrolytes have been broadly...
Read MoreSorption Capacity of Toxic Heavy Metal Cr (VI) Ion on bentonite clay from Aqueous Solution by Kinetic and Thermodynamic Studies
Introduction Chromium is a fundamental supplement for plants and creature digestion. Chromium species is basically Cr3+ and Cr6+ distinctive two oxidation states in aqueous solution. Cr (III) is considered as a fundamental minor component...
Read MoreLattice Dynamical Study and Elastic Property of Europium Telluride (Eute) Crystal
Introduction The electronic structure of Europium telluride (EuTe), which is a family of Europium Chalcogenides crystallize in F. C. C. NaCl structure and are also called rare earth europium chalcogenides. Europium Telluride (EuTe) is...
Read MoreDensity and Viscosity of LiCl, LiBr, LiI and Kcl in Aqueous Methanol at 313.15K
Introduction The density and viscosity data of electrolyte solutions have been extremely valuable in determining whether or not ion-solvent interactions exist in aqueous and non-aqueous solutions.1 For a better knowledge of many physicochemical processes...
Read MoreAn Internal Standard High-Performance Liquid Chromatography Method for Simultaneous Quantification of Candesartan and Hydrochlorothiazide in Combined Formulations
Introduction Candesartan (1-hydroxyethyl 2-ethoxy-1-[p-(o-1H-tetrazole-5-yl phenyl)benzyl] -7-benzimidazole carboxylate, cyclohexyl carbonate) (CDZN) and hydrochlorothiazide (6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulphonamide 1,1-dioxide) (HCTZ) are diuretics and angiotensin II receptor blockers prescribed for hypertension (Figure 1)1–3. Currently, researchers are interested in developing assay...
Read MoreImprovement of the Quality of the Local Beer «Tchukoutou» by Addition of Two Antioxidant Plants: Ocimum Gratissimum and Vernonia Amygdalina.
Introduction Tchoukoutou are traditional beers made with sorghum and other cereals such as millet or maize 1. In Togo, it exists different types of this beer, depending on the ethnic groups of the north....
Read MoreNanocomposite Coatings in Corrosion Protection Applications: An Overview
Introduction Corrosion is the process of deterioration or destruction of metals or materials when it comes in contact with the corrosive medium like acids, alkalis and compressed gases. Generally, there are two strategies adopted...
Read MoreMedicinal Utility of Some Schiff Bases and their Complexes with First Transition Series Metals: A Review
Introduction Cations are positively charged ions and are important for maintaining charge balance. Transition metal cations are known to neutralize charges on the residues of proteins, DNA and RNA 1. Transition metals, also known...
Read MoreDetermination of Acrylamide Contents in Grilled Meat and Fish Foods through Gas Chromatography Tandem Mass Spectrometry (GC-MS/MS) in Bangladesh
Introduction People change their food habits due to changes in their lifestyles, economies and global culture. In 20th century, fried food items are very popular among all types of people, especially in young generation...
Read MoreSpectral Description of Cellulose Textile Colored with Date Pits Extract: Study of the Fluorescence Characters
Introduction Until the end of the last century, natural dyes were the only source of color for all textiles commonly used by humans. These dyes were also used for dyeing wood, feathers, etc., and...
Read MoreCopper Nanoparticle(CuNP’s)Synthesis: A Review of the Various ways with Photocatalytic and Antibacterial Activity
Introduction A material is said to be nanomaterial, when its size in the range of 1-100 nm(at least in one dimension).Nanomaterials has been used in various fields such as physics, chemistry, biology, nanomedicine, electronics,...
Read MorePharmacoinformatics Profiling and Dynamic Studies of Selected Compounds Acting as Potential Inhibitors against DPP4 Enzyme
Introduction Diabetes is a worldwide metabolic disorder that has become a widespread epidemic disease in the last few decades, owing especially to the increasing frequency and incidence of Type 2 diabetes mellitus (T2DM), which...
Read MorePreparation, Characterization and Properties of some Acrylic Base Latex: A Review
Introduction In many manufacture processes, acrylic based polymer latex has significant role in synthetic rubber, surface coatings, adhesives, paper, textile additives are manufacture by latex. Acrylic based polymer latex raw materials are mostly obtained from fossil resources....
Read MoreInvestigations on the Effects of Salts and Carbohydrates on L-Lysine in Aqueous System at T=293.15K
Introduction The stabilization of the native conformations of biological macromolecules like proteins, carbohydrates, nucleic acids results due to several interactions such as hydrophobic, hydrogen bonding, and electrostatic force of attraction. Solute presence greatly affects...
Read MorePreparation, Characterization and Analytical Application of Tin (IV) Tungstoselenate – 1, 10 Phenanthroline
Introduction For decades, inorganic ion exchangers have been known in various fields of sciences due to their radiation and chemical stability, and because of their rigid structures, they possess specific selectivity towards the wide...
Read MorePotential Use of Copper Oxide Nanoparticles from Solanum Trilobatum Against Pathogenic Bacteria
Introduction Bacterial diseases present unfavorable impacts on human wellbeing. Bacteria can affect any part(s) of the human body 1. Bacterial diseases are the primary driver of persistent contaminations and mortality. An infectious disease caused...
Read MoreProximate Analysis, Antoxidant Property and Cytotoxicity Assessment of Pseuderanthemum Reticulatum Leaves
Introduction Natural plants are used as medicine since time immemorial. They are used as direct medicinal agent or a base for many semi-synthetic chemical compounds. The chemical structures derived from the bioactive compounds are...
Read MoreGreen Synthesis of Co3O4 Nanoparticles using Mappia Foetida Leaf Extract and its Antimicrobial Potential
Introduction As cobalt oxide nanoparticles (Co3O4NPs) are antiferromagnetic p-type semiconductor they have great interest of researchers due to their various applications in different fields such as semiconductors1, sensors1, batteries1, catalysis1, storage devices1 and capacitors1....
Read More