Abstract

Prawit Nuengmatcha, Ratana Mahachai and Saksit Chanthai^*

DOI : http://dx.doi.org/10.13005/ojc/300403

Graphene oxide (GO) was produced from bare graphite (BGP) material and was used as anintrinsic adsorbent for the removal of malachite green (MG) from aqueous solution. In an optimization study, the effects of the initial concentration of MG, solution pH, adsorbent dosage, contact time and ionic strength were investigated in detail. The water-soluble dye was analyzed at a maximum wavelength of 618 nm. The optimum conditions for MG removal from aqueous solution included a 300 mg/L initial concentration with 0.02 mg adsorbent at pH 5.1, and complete adsorption equilibrium was reached within 40 min. The maximum adsorption capacity of GO for MG was 384.62 mg/g, dramatically higher (over 10 times) than that of BGP (28.73 mg/g).The adsorption process followed pseudo-second-order kinetics. Thermodynamic data demonstrated that  dye adsorption onto the GO surface was mainly an exothermic spontaneous reaction. The remarkably different adsorption isotherms for GO and BGP fit well with the Langmuir and Freundlich models, respectively. It is therefore evident that the prepared GO can be used as a highly effective adsorbent for this toxic dye.

Thermodynamic; kinetic study; graphene oxide

[ View HTML Full Text]