Abstract

Sriatun, A. Darmawan, Sriyanti and W. Cahyani

DOI : http://dx.doi.org/10.13005/ojc/340234

In this work, we performed an experimental investigation the change of microstructure of magnetite by high energy milling-3D (HEM-3D) method using planetary ball milling at 400 rpm speed.  The present studies mainly focusses on the effect of milling on crystallinity and phase of magnetite by XRD, particle size by PSA and the morphology by SEM. The increasing of the ball mass in the milling process, mass ratio magnetite: ball (P/B) 1: 1, 1: 3 and 1: 5 give the magnetite particles smaller (<1μm), the crystallinity decreases but the peaks at (220), (311), (400), (511), and (440) were keep appearing. This shows that the phase of cubic spinel does not change. Rising the milling time for 1 h, 3 h and 5 h can lead to decreasing of size and crystallinity. Even milling time for 5 hours on mass ratio of magnetite: ball (P/B) 1: 5 causes the magnetite phase to change to amorphous.

Microstructure; Natural Magnetite; Sand Marina Beach; High Energy Milling-3D

[ View HTML Full Text]