Evaluation of the suitability of conophor oil for the production of alkyd resins and surface coatings

A. K. Asiagwu. P. E. Omuku, P. A. C. Okoye, M. A. Olisa and V. C. E. Ajiwe

Department of Pure and Industrial Chemistry, Nnamdi Azikiwe University, Awka (Nigeria)

ABSTRACT:

Oil was extracted from Tetracaripidum conophorum nut using solvent extraction method with hexane as solvent. The oil obtained was used to synthesize an alkyd resin, which in turn was utilized in the production of white gloss paints and varnishes. The IR and UV analysis of the oil showed the presence of C=C and C=O, while the Uv and IR examination of the resin revealed the presence of phthalic chain and C=O, C=C bond. The white gloss paint and varnishes produced had the right physical quality such as brushability and good drying time. The oil is a necessary raw material that can be used industrially in the production of essential materials.

KEYWORDS:

Conophor oil; Aklyd resins; surface coatings

Download this article as: 

Copy the following to cite this article: Asiagwu A. K, Omuku P. E, Okoye P. A. C, Olisa M. A, Ajiwe V. C. E. Evaluation of the suitability of conophor oil for the production of alkyd resins and surface coatings. Orient J Chem 2008;24(2).

Copy the following to cite this URL: Asiagwu A. K, Omuku P. E, Okoye P. A. C, Olisa M. A, Ajiwe V. C. E. Evaluation of the suitability of conophor oil for the production of alkyd resins and surface coatings. Available from: http://www.orientjchem.org/?p=11270