ISSN : 0970 - 020X, ONLINE ISSN : 2231-5039
     FacebookTwitterLinkedinMendeley

Adoption of Hydrogen Fuel Cell Vehicles and its Prospects for the Future

MD Shehan Habib*, Paroma Arefin

Bangladesh Council of Scientific and Industrial Research (BCSIR), Dhaka, Bangladesh

Corresponding Author E-mail: habib.shehan.hel@gmail.com

DOI : http://dx.doi.org/10.13005/ojc/380311

Article Publishing History
Article Received on : 24 Mar2022
Article Accepted on : 31 May 2022
Article Published : 06 Jun 2022
Article Metrics
Article Review Details
Reviewed by: Dr. Rudy Situmeang
Second Review by: Dr. Ashok Tiwari
Final Approval by: Dr. Ioana Stanciu
ABSTRACT:

The consumption of massive quantities of these fossil resources leads to extreme warming, air pollution, and the depletion of the ozone layer. Hydrogen can be the most promising source of renewable energy. Hydrogen fuel cells can produce electricity by allowing chemical gases and oxidants as reactants. The entire technology is environmentally friendly and produces water as a byproduct. The benefits of hydrogen and fuel cells are numerous but will not be fully apparent until they are in widespread use. Hence the usage of hydrogen as fuel in the fleet of cars will boost energy efficiency and reduce greenhouse pollution. For using hydrogen fuel cells in the road transport sector, the viability of the hydrogen energy network needs to be evaluated appropriately, and its tools, manufacturing processes, storage, fuel transport, dispensing, and consumption should be analyzed. This research discusses the key issues of elevated rates of environmental pollution in numerous urban areas and transport fuels efficiency and explores their protection measures utilizing hydrogen energy technology. In this study, the fundamentals, recent development, and prospects have been reviewed to analyze the practicability of consuming hydrogen as the primary fuel in vehicles and Proton exchange membrane fuel cell (PEMFC) has been used as the main fuel cell technology.

KEYWORDS:

Demand Forecast; Hydrogen Fuel Cell; HFC vehicle, cost; PEMFC

Download this article as: 

Copy the following to cite this article:

Arefin P, Habib M. S. Adoption of Hydrogen Fuel Cell Vehicles and its Prospects for the Future. Orient J Chem 2022;38(3).


Copy the following to cite this URL:

Arefin P, Habib M. S. Adoption of Hydrogen Fuel Cell Vehicles and its Prospects for the Future. Orient J Chem 2022;38(3). Available from: https://bit.ly/393tE5b


Introduction

The movement of citizens and goods as a socio-economic requirement has increased with modernization 1–3. The expansion of commercial development reflects the rise in transportation infrastructure, resulting in increased fuel usage. The transportation system is focused mainly on fossil fuels in modern days4–6. These transports end up with high environmental pollution, particularly unchecked carbon dioxide emissions. This carbon dioxide continuously adds to the harmful greenhouse effects and ozone layer depletion4,7,8. Consequently, producing fuel with cleaner, more reliable, more economical, and more environmentally sustainable characteristics has become an important issue to fulfill the demands of the modern world and save the environment simultaneously.

Because of its lightweight, exclusive abundance, and environmentally friendly oxidation component (water), hydrogen appears to be a perfect, environment-friendly energy carrier 2,9,10. Hydrogen is a rising fuel technology with a sustainable outcome to meet the increasing energy demand 2,11. Almost every kind of existing energy source such as renewable energy (solar, wind, tidal, biogas, biomass), fossil fuel (petroleum, gas, coal) can be transformed into Hydrogen energy which can be used as universal fuel to energize transport vehicles and electricity supply without emission13. Global hydrogen demand in 2050 will be around 972 million tons; among this demand, Europe, the United States of America, China will consume almost 80% of the total demand 12. In the way of cost-effective hydrogen fuel vehicle hydrogen fuel generation, fuel storing, fuel supply, fuel refill station management pose great challenges 14,15. Currently, fossil fuel is the prime source of hydrogen generation 16,17. Around 96% of hydrogen fuel is generated from fossil fuel, and the rest of the hydrogen fuel source is water 15. Fossil fuel-based hydrogen production meets the industrial hydrogen demand(18,19), but this

way of hydrogen production has carbon emission issues 8,20. On the other hand, hydrogen generation from a renewable source is yet to be economically feasible 16,20.

Hydrogen Fuel Cell ( HFC) Vehicle

A vehicle that is run by the energy of a fuel cell is known as a fuel cell vehicle. Fuel cell vehicles are emission-free, less knocking, trustworthy technology 22,23. For a sustainable world, there is a need to find new technology to get rid of fossil fuel burning pollution 24–26. In comparison to the existing fossil fuel-based vehicles, hydrogen fuel cell (HFC) vehicles are yet to be cost-effective. Two possible ways the vehicles powered by emission-free hydrogen fuel or fossil fuel and hydrogen fuel, both technology hybrid-powered vehicles – can be better options rather than fossil fuel-based vehicles 27–29

Hydrogen is the number one element in the periodic table with one electron and one proton. Colorless, odorless hydrogen fuel is a universal power source 30. This fuel is produced either from water split or oxygen and fossil fuel reaction. Hydrogen fuel can be used to run transports and can produce electricity or heat 31,32. A fuel cell is an electrochemical device with two electrode anode and cathode 33,35. A proton exchange membrane separates two electrodes 36. The membrane allows only hydrogen ions to pass through it. Two input gas, hydrogen in the anode and oxygen (from the air) in the cathode, create an electrochemical environment, and a direct current is produced in the external circuit37,38. This electricity makes the vehicle operate.

Components of Hydrogen Fuel Cell Vehicle

At the early stage of the fuel cell, water has been used as the hydrogen source. Hydrogen and oxygen are the two components of water 39. The electrochemical reaction in the fuel cell is reversed to the electrolysis process of water. After feeding the fuel cell with hydrogen gas, the fuel cell will produce electricity, heat, and water due to an electrochemical reaction occurring between anode and cathode separated by a proton exchange membrane 40. After performing all the studies and findings from electric vehicles and hydrogen fuel cells, the fuel cell vehicle becomes a reality. The produced electricity from the fuel cell will run the wheel or be stored in a capacitor system called a hybrid fuel cell vehicle 10,41. If the higher acceleration load is applied in the fuel cell, the longevity of the membrane and fuel cell will decrease in a hybrid fuel cell vehicle 35,42. Fuel cell, hydrogen fuel source, air input, humidifier, cell heat realizing system, electricity containing system, direct current to alternative current conversion system, propelling motor, a total integrated operating system are all the significant fuel cell vehicle building components. All the components must be optimized with each other for better performance. The fuel cell produces direct current (DC) using hydrogen gas. The DC must be converted to an alternative current (AC) to propel a vehicle. A primary battery holds the energy from the fuel cell, and this energy is applied to rotate the vehicle wheel by a motor. Additionally, a secondary battery is used to initiate all the mechanisms in the vehicle. To supply input hydrogen gas to the fuel cell, there is a hydrogen storage tank. By a sophisticated nozzle, the storage tank is refilled from the hydrogen refueling station43,44. A fuel cell vehicle is run by the electricity produced from fuel cells. By an integrated cooling system, the optimum thermal condition is maintained.

Table 1 shows the fuel cell types mostly used in fuel cell vehicles. In most of the vehicles in the market, proton exchange membrane fuel cells are being used as a powerhouse due to some particular criteria45. Short initiation time, operation feasibility at room temperature, collection capacity of reactant gas(oxygen) from the air, low operating temperature range from 50℃ to 100℃ make proton exchange membrane more practicable to implement in fuel cell vehicles 47. In a large vehicle, the hydrogen fuel cell can energize the additional needs as the replacement of a battery.

Table 1: Most used fuel cell types in transportations.

Cell variants

Working Temperature

Efficiency %

Catalyst

Pros

Cons

Application

Proton Exchange Membrane Fuel Cell

20 to 120℃

40 to 60

Pt

  1. Instant initiation time
  2. Operates at room temperature
  3. Collects reactant gas (Oxygen) from air

High carbon-mono-oxide sensitivity

Need humidification for input gas.

Secondary energy source, Transportation,

Fuel cell vehicles (47)

Alkaline Fuel Cell

60 to 120℃

60

Ni / Ag

  1. Instant initiation time
  2. Operates at room temperature

Reactant gas (Oxygen) must be pure.

Airways or Defense(48,49)

There are other types of fuel cells that are fed with hydrocarbon, ethane-based alcohol, methane-based alcohol, gas from natural sources. The classification of fuel cells differs from the operating temperature 50. A higher operating temperature indicates the higher price of the fuel cell. Considering overall performance, Proton exchange membrane fuel cell (PEMFC) and Solid oxide fuel cell (SOFC) are in a favorable state to be utilized further. Less operation time, better performance, operating temperature range is below 100℃, easy mechanism and installation process make the perfluorosulfonic based proton exchange membrane feasible to introduce it in the fuel cell technology51,52. Commercially this membrane is known as Nafion, and chemically it is made from perfluorosulfonic acid 53,54. In a fuel cell vehicle, the widely used membrane type is polymer electrolyte because the operating temperature range is within 100℃, fits in a small space, has better performance, and has multipurpose usability 33,39,42,53,54. Solid oxide fuel cell operates at a high-temperature range at 1000℃ 55. This type of fuel cell is mainly used in static mode or as a backup electricity source. Logistic supply, buses, trucks, forklifts, airways, marine, motorcycles, etc., are the main vehicles that can use hydrogen fuel cells 1,15.

Advantages of Hydrogen Fuel Cell Vehicle

The transportation sector is one of the major contributors to greenhouse gas emissions 56. Fuel demand is rising day after day. With the depleting of fossil fuels, the globe is heading towards an energy crisis 57,58. If we don’t find any alternative energy source, the demand would be grave. After burning all fossil fuels, the world is unstable to live in with all the greenhouse effects due to pollution. Transport vehicles are one of the main contributors to greenhouse gas emitter, which is around 30% of the total global emission. The vehicles run on the road contribute 70% emission among the total 30% transport emission 39. Road transport vehicles consume 27% of fossil fuel among the total fuel consumption globally. Consequently, this conventional fossil fuel-based vehicle is 25% responsible for global carbon emissions. Among all the transport pollution, 70% of carbon emission is due to the vehicles run on the road, and 61% emission is due to the car. The emission has been curtailed in almost all the power consumption systems except the transportation8. In Europe, fossil fuel cars will be reduced to 50% within 2030, and by 2050 fossil fuel car use will be zero. Fossil fuel car registration has been restricted in a few countries 60.

In addition to this, the geopolitical crisis for fossil fuel will brew in the future. All over the world, every nation is seeking a self-sufficient dependency for energy with renewable and emission-free criteria61. Electric vehicles and hydrogen fuel cell vehicles can be an eligible way out of the issue. The electric power use in vehicles is very minimal. During the decreased load of electricity use from renewable energy sources such as solar, wind, geothermal, etc., the unused electricity can be converted to hydrogen fuel for further use 62,63. All the leading fuel cell vehicle manufacturer has prospects of next-generation fuel cell vehicle production, and the vehicle will be more sophisticated than before with a lower price range 31,51.

Emission due to fossil fuel burning has enormous environmental and health issues 64,65. Every year around five hundred thousand people die because of air pollution-borne diseases 29. Agricultural damage, medical cost for pollution-related disease, decreased production, global warming, and natural disaster due to pollution needs to be considered in the responsibility list of fossil fuels. Every year this pollution-related cost is 24 billion euros in Europe and globally the cost is thousand billion euro 66.

The fuel value of hydrogen is 140kj/g. The energy value of conventional fossil fuel is three times less than the fuel value of hydrogen 30. Total hydrogen fuel weighs relative to fossil fuel much less. As a result, the vehicle net weight will be less after refill, and the fuel loss will be less. Hydrogen refill time in fuel cell vehicles is quicker than in an electric vehicle. In a study, 78% of vehicle expert believes that this fact will make hydrogen fuel cell vehicle more achievable in the vehicle market 29.

Prerequisites of using HFC Vehicles

It is very important users switch from fossil fuel vehicles to hydrogen fuel cell vehicles68 . User motivation will accelerate the viability of the fuel cell vehicle. With safety assurance, the consumer will buy fuel cell cars to achieve carbon-free, pollution-free, noise-free and healthy environments. Initially, fuel cell integration in heavy load applications such as public vehicles, supply vehicles, etc., will grow faith and initial infrastructure. A risk-free public and private investment will improve a wide range of fuel cell incorporation.

A study shows that 54 fuel cell vehicle drivers run their vehicle around 124,290km with a hydrogen fueling of 1370 kg. Among the drivers, 80% were satisfied with the performance of the fuel cell vehicles, 98% think that hydrogen fuel cell vehicle is more reliable than conventional fossil fuel and 75% find that the vehicle cost needs to be at the limit of 40 thousand USD 67.

Hydrogen is odorless, colorless, flammable gas. Hydrogen gas is stored in a tank with 700 bar pressure. Therefore, any accidental tank leakage will be dangerous 39. Hydrogen gas tank architecture is very significant in terms of safety measures. So, there must be a hydrogen or leakage sensing system in a fuel cell vehicle 29. Hydrogen is a flammable gas, but there will be less damage because of the localized behavior of hydrogen gas.

The hydrogen fueling station has to be sophisticated with higher thermal condition and storage capacity maintenance 30,62. Initially, about 60 hydrogen fuel refill stations will be adequate to feed fuel cell vehicles in the UK 9,68. Fuel cell vehicle-friendly infrastructure is also significant, along with hydrogen fuel generation, fuel supply, fuel station 12,39. Table 2 shows the estimated expansion of HFC vehicles throughout the world by 2050.

Table 2: Expansion estimation of HFC vehicles throughout the world by 2050 .

Country

Currently

2025

2030

2050

Republic of Korea [80]

100(69)

210(69)

520(69)

Japan[82]

160(69)

320

900

 

China[39,83-90]

100(69)

300(69)

500

 

California, USA [86]

     

10000

All over USA [68]

80(69)

100 by (69)

7100 (47)

21000

Netherlands

100(69)

400(69)

1000(69)

 

Europe[73]

152

 

3700

4600

Germany

 

400 by 2023(69)

1000(69)

 

France

 

100 by 2023

400 to 1000 by 2028(69)

 

Fuel cell vehicle Demand Forecast.

From 1999, California state of USA has the hardest regulation to emphasize emission-free vehicle operation and favorable infrastructure. All over the USA, the total number of hydrogen fuel cell vehicles was near 2700 in the year 2017. Fuel demand currently in California is 2ton per day, and within 2023, the fuel demand will be 26ton per day 70. A town in Japan named Kitakyushu is based on Hydrogen energy and application. Among all the applications of hydrogen fuel, hydrogen-based fuel stations for fuel cell vehicles were demonstrated in this city in 2004. Table 3 shows the Fuel cell vehicle target in number by 2030.

Table 3: Fuel cell vehicle target (in number) by 2030 (Adapted from APERC Asia-Pacific Economic & Cooperation, 2018):

Countries

2020

2023

2025

2030

Europe

100042(47)

   

370000034

USA

13400

 

40000

 

Japan

4000071

 

200000(71)

80000024,71

China

500069

 

50000(69)

10000003,36

France

 

500069

520071

20,800-5200069 within 203071

Korea

1000069

 

100000(69)

1,800,00069, 71

In Asia-pacific economic cooperation (APEC) region, there is a goal to replace conventional fossil fuel vehicles with hydrogen fuel cell vehicles or hybrid vehicles. It has been anticipated that the purchase of fuel cell vehicles will rise from 2031, and after that, in 2040, the rise will be 15%, and in 2050 the rise be 30% more than the previous periods. In this region, there will be a need for 32691kiloton hydrogen fuel in 2040, and this need will go up to 130,277kiloton ten years later in 2050 70.

In the APEC region, all the countries will try to reduce their fossil fuel intake and will introduce hydrogen fuel energy within 2040. At the amount of 131million tons of fossil fuel use have been reduced in APEC countries. With the increasing integration of hydrogen fuel, the dependency on fossil fuel will be reduced by 4.5% in the APEC region 70. Consistent performance over time is a vital issue in fuel cell vehicles 22. (39). Table 4 shows present and future changes in characteristics of HFC vehicles.

Table 4: Present and Future change in characteristics of HFC vehicles (Adapted from Whiston et al., 2019).

Parameters

Current

Future

Cost

USD 75/KW

USD 35/kW within 2050

Fuel cell lifetime

4000 hour

8000hour within 2050

Density of power

2.50kW/L

3kW/L within 2035

Prospects of Different types of Fuel Cell Vehicles

Fuel cell train

The locomotive engine will be knocking free, vibration-free and the train can be accelerated without any gear shifting mechanism 29. Now trains are being operated with electricity rather than fossil fuel 30. But the electricity is produced with fossil fuel or unsustainable ways. Hydrogen fuel cell train is a better option for remote areas where the electric facility is more costly or in urban areas where enough space is a shortage for train electrification. A fuel cell train is now in operation in Germany, and 40 fuel cell trains will operate within 2020 29. tank will be on the roof of the train, and the millage will be around 800 km. In the UK, the fossil-fuel train will be banned within 2040. To achieve this target, the UK has already started the conversion of train technology from fossil fuel train to fuel cell train 3. Trams are in operation in China 44. The fuel cell of a bus or truck can be used in light train operations. There is no need for train base fuel cell production, and the production cost will be reduced. Hydrogen fuel cell trains will be 50 percent costly than fossil fuel trains. If hydrogen fuel production cost is reduced, then the fuel cell train will be more competitive and viable 13. It has been found that the fuel cell train is already feasible to operate 73.

Fuel cell bus

In the USA, they fix a fuel cell vehicle manufacturing roadmap in which the longevity of a hydrogen fuel cell bus will be 25 thousand hours, and for a car, it will be 8 thousand hours 29. In heavy vehicles such as buses or trucks, it is very feasible to operate with fuel cells because the heavy vehicle needs longer operation with less refueling time. Where hydrogen fuel cell fits in reliably, heavy fuel cell vehicle technology has already advanced a lot 74. The hydrogen fuel capacity of a bus is about 40 kilograms with 350bar pressure in a storage tank. In Europe, a fuel cell bus successfully traveled about 4 million miles 75. Within 2030 the fuel cell bus price will be 10 to 20 percent costly than fossil fuel vehicles(5). The bus operation lifetime reached 18 thousand hours in the United Kingdom, 25 thousand hours in California 76. In Europe, the affordability of the fuel cell bus crossed 90 percent than before, and hydrogen fuel refill stations rose around 96% than before 77. Table 5 presents the Fuel cell bus operation, count:

Table 5: Fuel cell bus operation count.

Region

Current

Fuel cell bus count of 2020

2030

Europe

76 42 73 86

83

45,000

USA

74

5,300,000337, 47

North America [87,88]

 

44

Japan [89]

18

10047

1200

China [90]

200064 83 84 85

1160087

Fuel cell Truck

For heavy transport vehicles such as trucks need high-performance propulsion. Here hydrogen fuel cell is a good choice because of short refueling time and high operation time with a single refill of fuel. For the heavy requirement of performance, the fuel cell truck longevity goal has been fixed to 50 thousand hours. High performance using reduced fuel price is also required. Truck manufacturer companies around the world
are about to launch fuel cell trucks. The hydrogen fuel cell truck will be more feasible if there are enough hydrogen refueling facilities.

Fuel cell ships

Hydrogen fuel cell technology has already been introduced in the marine sector. Ships, ferries are operating with fuel cells on a trial basis, and the number of the fuel cell will rise within 2030. There is a pollution control water zone where hydrogen fuel cell integration is the perfect option. Initially, hydrogen fuel cells can be used for backup electricity supply in marine requirements such as cooling systems, light, heating, ignition, etc., particularly in small electrical loads. If hydrogen fuel cost drops to 7 dollars per kg, then fuel cells could be widely used in full electricity and propulsion applications in marine demand 7,48,. Hydrogen fuel cell marine integration will improve air quality and reduce pollution in the marine region.

Hydrogen fuel cell-powered airways

Research is ongoing to curtail pollution from aviation, but fruitful progress is yet to be found. The target of the International Civil Aviation Organization is emission-free aviation. Hybrid aviation operation does not show much reduction of emission. To meet the propulsion demand in aviation, compressed liquid hydrogen is needed, which is more costly. Initially, hydrogen fuel cells can be applied in light flying requirements rather than a heavy application. It is an expectation that within 2050 hydrogen energy will be introduced in aviation significantly 48, 29.

Fuel cell motorcycle

To reduce the carbon footprint from the globe motorcycle pollution, need to be addressed 29. Already Suzuki introduced a 4-kilowatt fuel cell motorcycle, and 48 motorcycles are being studied in the UK 74.

Fuel Cell Cost Management for Expanded Use

Almost all the leading vehicle manufacturers are trying to introduce fuel cell vehicles more reliably. One of the significant steps to be achieved to make fuel cell vehicles more viable is low-cost hydrogen fuel supply to the fuel cell (39). Ford car manufacturing company first introduced vehicles that will run not by the fossil fuel-based machine but with the electric powered technology44. The hydrogen fuel cell  vehicle will run  360 miles with a refueling period of 3 to 5 minutes 78. A 60W fuel cell is required to run a car in Europe 44. But the high price range is an obstacle to replacing conventional fossil fuel-based vehicles with electric or hydrogen fuel cell vehicles. The fuel cell architecture, hydrogen fuel recharge station, longevity, required hydrogen production needs to be assessed and optimized to meet the feasible price limit35,73.

The fuel cell vehicles are available in the market with a high price range due to their requirements of pure hydrogen at a value of 99% 50. The refueling system of hydrogen fuel, fuel preservation, fuel manufacture, and fuel supply is the driving criteria of the high price of fuel cell-based vehicles. Methanol could be an Alternative fuel carrier due to the liquid form at room temperature. So, the preservation, manufacture, supply cost will be less than that with hydrogen8. Sophisticated upgrades in size, operation reliability can make fuel cell vehicles more feasible to be commercialized.

The cost of liquid hydrogen will be more feasible within 2050 rather than the recent gasification technology. A common hub of hydrogen supply can make fuel cell vehicles more comfortable for the users 79. A summary of a technological study in Germany highlighted that there is no need for a big investment in infrastructure development in hydrogen fuel cell vehicle prospects. This study also indicates that around 2050, the fuel cell vehicle price will decrease to 22 USD per kW 39. In a finding of the Motor Manufacturers and Traders Society, from 2017, the use of hydrogen fuel cell vehicles increased 280 percent than that of the previous four years 80,81.

The fuel cell vehicle producer reckoned that the decreased price in the recent period would be 32 to 34 thousand USD which is 24 percent lower than before 2020 47,60. Acknowledging this study International Energy Agency reported that the new cost of fuel cell vehicles will be 33.6 thousand USD and 33.4 thousand USD in 2030 and 2050, respectively 9,72. According to the recent hydrogen fuel cell vehicle sale and production, within 2050, there will be four hundred million fuel cell vehicles in use. Hydrogen fuel cell integration in locomotive and airways will rise 5 percent within 2050 47,82. Norway and the UK will forbid fossil fuel vehicles and will fully depend on carbon-free vehicles within 2025 and 2040, respectively 71. There will be an 80 percent reduction of carbon emission within 2050 in Europe 69,83. If the hydrogen fuel comes from renewable energy sources, then the hydrogen fuel cell vehicles will be more environmentally friendly with zero pollution.

Alternative to the precious metal and more active catalyst integration could be a solution for cost-effective fuel cells. If a single manufacturing station produces a large amount of fuel cell spears, then the overall cost will be reduced. About 50% cost of the fuel cell is consists of proton exchange membrane, bipolar components, catalytic metal, and gas diffusion components 84. In upcoming days combined metal elements and carbon tubes with nanotechnology will improve the hydrogen storage issues 39. Optimum use of the platinum catalyst can move the cost from 0.6 g/kW to 0.2g/kW (61,82). On the other hand, palladium will be an alternative for catalyst cost reduction 12.

Fuel cells would have to lower their costs significantly without compromising on performance to become successful in the business. By 2025, the cost of bulk fuel cell vehicles should be comparable to the cost of hybrid vehicles. Unlike batteries, where the majority of the cost is derived from the raw materials required to manufacture them, the most expensive aspect of a fuel cell is the construction of the fuel cell system itself—not the substances used to manufacture the vehicle.

Conclusion

The detrimental effects of pollutants from conventional fuel vehicles have led to the need for environmentally friendly energy sources. For the industry to embrace a hydrogen economy, the cost of building and maintaining hydrogen stations must also shrink. Plans and projections for the future of hydrogen and fuel cells should be developed in the user counties. Research for hydrogen fuel cell electric vehicles is important to develop technologies that advance fuel cell systems, subsystems, and components. Recent advances in the manufacture of hydrogen fuel, potential applications, and preservation, along with the environmental impacts of hydrogen as an energy carrier, are highlighted in this paper. This paper can serve as a direction for using hydrogen fuel cell vehicle in developing countries through cost reduction.

Conflict of Interest

The authors declare no conflict of interest.

Funding Sources

There was no funding.

References

  1. Riedl SM. Development of a hydrogen refueling station design tool. Int J Hydrogen Energy [Internet]. 2020;45(1):1–9. Available from: https://doi.org/10.1016/j.ijhydene.2019.09.234
    CrossRef
  2. Pei P, Wang M, Chen D, Ren P, Zhang L. Key technologies for polymer electrolyte membrane fuel cell systems fueled impure hydrogen. Prog Nat Sci Mater Int [Internet]. 2020;30(6):751–63. Available from: https://doi.org/10.1016/j.pnsc.2020.08.015
    CrossRef
  3. Sutharssan T, Montalvao D, Chen YK, Wang WC, Pisac C, Elemara H. A review on prognostics and health monitoring of proton exchange membrane fuel cell. Renew Sustain Energy Rev. 2017;75:440–50.
    CrossRef
  4. Chen A, Guan YJ, Bustamante M, Uribe L, Uribe-Lorío L, Roos MM, et al. Production of renewable fuel and value-added bioproducts using pineapple leaves in Costa Rica. Biomass and Bioenergy. 2020 Oct 1;141.
    CrossRef
  5. Du Z, Liu C, Zhai J, Guo X, Xiong Y, Su W, et al. A Review of Hydrogen Purification Technologies for Fuel Cell Vehicles. Catalysts [Internet]. 2021 Mar 19;11(3):393. Available from: https://www.mdpi.com/2073-4344/11/3/393
    CrossRef
  6. Mehta N, Cunningham E, Roy D, Cathcart A, Dempster M, Berry E, et al. Exploring perceptions of environmental professionals, plastic processors, students and consumers of bio-based plastics: Informing the development of the sector. Sustain Prod Consum [Internet]. 2021;26:574–87. Available from: https://doi.org/10.1016/ j.spc.2020.12.015
    CrossRef
  7. Sazali N, Salleh WNW, Jamaludin AS, Razali MNM. New perspectives on fuel cell technology: A brief review. Membranes (Basel). 2020;10(5).
    CrossRef
  8. Du Z, Liu C, Zhai J, Guo X, Xiong Y, Su W, et al. A review of hydrogen purification technologies for fuel cell vehicles. Catalysts. 2021;11(3):1–19.
    CrossRef
  9. Sharma S, Ghoshal SK. Hydrogen the future transportation fuel: From production to applications. Renew Sustain Energy Rev [Internet]. 2015 Mar;43:1151–8. Available from: https://linkinghub.elsevier.com/ retrieve/pii/S1364032114010405
    CrossRef
  10. Engelen PJ, Kool C, Li Y. A barrier options approach to modeling project failure: The case of hydrogen fuel infrastructure. Resour Energy Econ. 2016;43:33–56.
    CrossRef
  11. Rosen MA, Koohi-Fayegh S. The prospects for hydrogen as an energy carrier: an overview of hydrogen energy and hydrogen energy systems. Energy, Ecol Environ [Internet]. 2016 Feb 14;1(1):10–29. Available from: http://link.springer.com/10.1007/s40974-016-0005-z
    CrossRef
  12. Iida S, Sakata K. Hydrogen technologies and developments in Japan. Clean Energy. 2019;3(2):105–13.
    CrossRef
  13. Kalamaras CM, Efstathiou AM. Hydrogen Production Technologies: Current State and Future Developments. Conf Pap Energy [Internet]. 2013 Jun 6;2013:1–9. Available from: https://www.hindawi.com/ journals/cpis/2013/690627/
    CrossRef
  14. Bai W, Zhang L. How to finance for establishing hydrogen refueling stations in China? An analysis based on Fuzzy AHP and PROMETHEE. Int J Hydrogen Energy [Internet]. 2020;(237). Available from: https://doi.org/10.1016/j.ijhydene.2019.12.198
    CrossRef
  15. Zhang G, Zhang J, Xie T. A solution to renewable hydrogen economy for fuel cell buses – A case study for Zhangjiakou in North China. Int J Hydrogen Energy [Internet]. 2020;45(29):14603–13. Available from: https://doi.org/10.1016/j.ijhydene.2020.03.206
    CrossRef
  16. Blazquez-Diaz C. Techno-economic modelling and analysis of hydrogen fuelling stations. Int J Hydrogen Energy [Internet]. 2019;44(2):495–510. Available from: https://doi.org/10.1016/ j.ijhydene.2018.11.001
    CrossRef
  17. Nuttall WJ, Bakenne AT. Fossil Fuel Hydrogen. Fossil Fuel Hydrogen. 2020.
    CrossRef
  18. Ochoa Bique A, Zondervan E. An outlook towards hydrogen supply chain networks in 2050 — Design of novel fuel infrastructures in Germany. Chem Eng Res Des [Internet]. 2018;134:90–103. Available from: https://doi.org/10.1016/j.cherd.2018.03.037
    CrossRef
  19. Wang Y, Chen KS, Mishler J, Cho SC, Adroher XC. A review of polymer electrolyte membrane fuel cells: Technology, applications, and needs on fundamental research. Appl Energy. 2011;88(4):981–1007.
    CrossRef
  20. Campíñez-Romero S, Colmenar-Santos A, Pérez-Molina C, Mur-Pérez F. A hydrogen refuelling stations infrastructure deployment for cities supported on fuel cell taxi roll-out. Energy. 2018;148(2018):1018–31.
    CrossRef
  21. Frank ED, Elgowainy A, Khalid YS, Peng JK, Reddi K. Refueling-station costs for metal hydride storage tanks on board hydrogen fuel cell vehicles. Int J Hydrogen Energy [Internet]. 2019;44(57):29849–61. Available from: https://doi.org/10.1016/j.ijhydene.2019.09.206
    CrossRef
  22. Stephens-Romero SD, Brown TM, Carreras-Sospedra M, Kang JE, Brouwer J, Dabdub D, et al. Projecting full build-out environmental impacts and roll-out strategies associated with viable hydrogen fueling infrastructure strategies. Int J Hydrogen Energy [Internet]. 2011;36(22):14309–23. Available from: http://dx.doi.org/10.1016/ j.ijhydene.2011.08.005
    CrossRef
  23. Stephens-Romero SD, Brown TM, Kang JE, Recker WW, Samuelsen GS. Systematic planning to optimize investments in hydrogen infrastructure deployment. Int J Hydrogen Energy [Internet]. 2010;35(10):4652–67. Available from: http://dx.doi.org/10.1016/ j.ijhydene.2010.02.024
    CrossRef
  24. Lin R, Ye Z, Guo Z, Wu B. Hydrogen station location optimization based on multiple data sources. Int J Hydrogen Energy [Internet]. 2020;45(17):10270–9. Available from: https://doi.org/10.1016/ j.ijhydene.2019.10.069
    CrossRef
  25. Bauer A, Mayer T, Semmel M, Guerrero Morales MA, Wind J. Energetic evaluation of hydrogen refueling stations with liquid or gaseous stored hydrogen. Int J Hydrogen Energy [Internet]. 2019;44(13):6795–812. Available from: https://doi.org/10.1016/j.ijhydene.2019.01.087
    CrossRef
  26. Xu C, Wu Y, Dai S. What are the critical barriers to the development of hydrogen refueling stations in China? A modified fuzzy DEMATEL approach. Energy Policy [Internet]. 2020;142(November 2019):111495. Available from: https://doi.org/10.1016/j.enpol.2020.111495
    CrossRef
  27. Hu X, Song K, Niu W, Zhang T. Powertrain System Durability in Proton Exchange Membrane Fuel Cell Electric Vehicles: A Review. SAE Tech Pap. 2018;2018-April:1–12.
    CrossRef
  28. Wang H, Wang R, Sui S, Sun T, Yan Y, Du S. Cathode Design for Proton Exchange Membrane Fuel Cells in Automotive Applications. Automot Innov [Internet]. 2021 May 21;4(2):144–64. Available from: https://link.springer.com/10.1007/s42154-021-00148-y
    CrossRef
  29. Staffell I, Scamman D, Velazquez Abad A, Balcombe P, Dodds PE, Ekins P, et al. The role of hydrogen and fuel cells in the global energy system. Energy Environ Sci. 2019;12(2):463–91.
    CrossRef
  30. Bruce S, Temminghoff M, Schmidt E, Palfreyman D, Hayward J, Munnings C, et al. National Hydrogen Roadmap: Pathways to an economically sustainable hydrogen industry in Australia [Internet]. National Hydrogen Roadmap, CSIRO, Australia. 2018. Available from: https://www.h2knowledgecentre.com/content/journal1895
    CrossRef
  31. Viesi D, Crema L, Testi M. The Italian hydrogen mobility scenario implementing the European directive on alternative fuels infrastructure (DAFI 2014/94/EU). Int J Hydrogen Energy [Internet]. 2017;42(44):27354–73. Available from: https://doi.org/10.1016/ j.ijhydene.2017.08.203
    CrossRef
  32. Honma Y, Kuby M. Node-based vs. path-based location models for urban hydrogen refueling stations: Comparing convenience and coverage abilities. Int J Hydrogen Energy [Internet]. 2019;44(29):15246–61. Available from: https://doi.org/10.1016/ j.ijhydene.2019.03.262
    CrossRef
  33. Shahrukh Shamim, K. Sudhakar, Brajesh Choudhary JA. A review on recent advances in proton exchange membrane fuel cells : Materials , technology and applications. Adv Appl Sci Res. 2015;6(March 2016):89–100.
  34. Yonoff RE, Ochoa GV, Cardenas-Escorcia Y, Silva-Ortega JI, Meriño-Stand L. Research trends in proton exchange membrane fuel cells during 2008–2018: A bibliometric analysis. Heliyon. 2019;5(5).
    CrossRef
  35. Joghee P, Malik JN, Pylypenko S, O’Hayre R. A review on direct methanol fuel cells–In the perspective of energy and sustainability. MRS Energy Sustain. 2015;2(1):1–31.
    CrossRef
  36. Salam MA, Habib MS, Arefin P, Ahmed K, Uddin MS, Hossain T, et al. Effect of Temperature on the Performance Factors and Durability of Proton Exchange Membrane of Hydrogen Fuel Cell: A Narrative Review. Mater Sci Res India [Internet]. 2020 Sep 5;17(2):179–91. Available from: https://bit.ly/38SVUTC
    CrossRef
  37. Brey JJ, Carazo AF, Brey R. Exploring the marketability of fuel cell electric vehicles in terms of infrastructure and hydrogen costs in Spain. Renew Sustain Energy Rev [Internet]. 2018;82(November 2017):2893–9. Available from: https://doi.org/10.1016/j.rser.2017.10.042
    CrossRef
  38. Iordache M, Schitea D, Iordache I. Hydrogen refuelling station infrastructure roll-up, an indicative assessment of the commercial viability and profitability in the Member States of Europe Union. Int J Hydrogen Energy [Internet]. 2017;42(50):29629–47. Available from: https://doi.org/10.1016/j.ijhydene.2017.09.146
    CrossRef
  39. Tanç B, Arat HT, Baltacıoğlu E, Aydın K. Overview of the next quarter century vision of hydrogen fuel cell electric vehicles. Int J Hydrogen Energy. 2019;44(20):10120–8.
    CrossRef
  40. Habib MS, Arefin P, Salam MA, Ahmed K, Uddin MS, Hossain T, et al. Proton Exchange Membrane Fuel Cell (PEMFC) Durability Factors, Challenges, and Future Perspectives: A Detailed Review. Mater Sci Res India [Internet]. 2021 Aug 30;18(2):217–34. Available from: http://www.materialsciencejournal.org/vol18no2/proton-exchange-membrane-fuel-cell-pemfc-durability-factors-challenges-and-future-perspectives-a-detailed-review/
    CrossRef
  41. Miele A, Axsen J, Wolinetz M, Maine E, Long Z. The role of charging and refuelling infrastructure in supporting zero-emission vehicle sales. Transp Res Part D Transp Environ [Internet]. 2020;81(February):102275. Available from: https://doi.org/10.1016/j.trd.2020.102275
    CrossRef
  42. Choudhury B, Escobedo G, Curtin DE, Banerjee S. PEM hydrogen fuel cell durability: A perspective review and recent advances. Transw Res Netw. 2008;37661(2):695–23.
  43. Hinds G. Performance and Durability of PEM Fuel Cells : A Review. Mater Perform [Internet]. 2004;(September). Available from: http://www.npl.co.uk/upload/pdf/NPL_Report_DEPC-MPE_002.pdf
  44. de Frank Bruijn A, Janssen GJM. PEM Fuel Cell Materials: Costs, Performance and Durability. Encyclopedia of Sustainability Science and Technology. 2017. 1–41 p.
    CrossRef
  45. Innovation N, Hydrogen P. PRHYDE project on heavy-duty hydrogen refueling protocol. Fuel Cells Bull. 2020;2020(3):8–9.
    CrossRef
  46. March I. HTEC, Shell plan Canada’s first retail hydrogen refueling station in Vancouver this year. Fuel Cells Bull. 2018;2018(3):1.
    CrossRef
  47. Deloitte China. Fueling the Future of Mobility Hydrogen and fuel cell solutions for transportation. Financ Advis. 2019;1:Volume 1.
  48. Schenk A, Cermenek B, Hacker V. Other polymer electrolyte fuel cells. Fuel Cells and Hydrogen: From Fundamentals to Applied Research. 2018. 91–115 p.
    CrossRef
  49. Xu F, Su Y, Lin B. Progress of Alkaline Anion Exchange Membranes for Fuel Cells: The Effects of Micro-Phase Separation. Front Mater. 2020;7(February):1–7.
    CrossRef
  50. Gu Y, Liu Y, Cao X. Evolving strategies for tumor immunotherapy: Enhancing the enhancer and suppressing the suppressor. Natl Sci Rev. 2017;4(2):161–3.
    CrossRef
  51. Wu D, Peng C, Yin C, Tang H. Review of System Integration and Control of Proton Exchange Membrane Fuel Cells. Vol. 3, Electrochemical Energy Reviews. 2020. 466–505 p.
    CrossRef
  52. Hamrock SJ, Yandrasits MA. Proton exchange membranes for fuel cell applications. Polym Rev. 2006;46(3):219–44.
    CrossRef
  53. Adler SB. Fuel Cells: Current Status and Future Challenges. Ceres. 1839;2–9.
  54. Yue Y. Performance and Durability of High-Temperature Proton Exchange Membrane Fuel Cells Operated on Propane Reformate. 2019;
    CrossRef
  55. Orera VM, Laguna-Bercero MA, Larrea A. Fabrication methods and performance in fuel cell and steam electrolysis operation modes of small tubular solid oxide fuel cells: A review. Front Energy Res. 2014;2(JUN):1–13.
  56. Kale S. A Review Paper on Electrical System Consisting of Fuel Cell. 2016;(November 2015).
  57. Shayegan S, Pearson PJG, Hart D. Hydrogen for buses in London: A scenario analysis of changes over time in refuelling infrastructure costs. Int J Hydrogen Energy [Internet]. 2009;34(19):8415–27. Available from: http://dx.doi.org/10.1016/j.ijhydene.2009.06.084
    CrossRef
  58. Apostolou D, Xydis G. A literature review on hydrogen refuelling stations and infrastructure. Current status and future prospects. Renew Sustain Energy Rev [Internet]. 2019;113(July):109292. Available from: https://doi.org/10.1016/j.rser.2019.109292
    CrossRef
  59. Wang M. Fuel choices for fuel-cell vehicles: Well-to-wheels energy and emission impacts. J Power Sources. 2002;112(1):307–21.
    CrossRef
  60. Ajanovic A, Haas R. Economic and Environmental Prospects for Battery Electric- and Fuel Cell Vehicles: A Review. Fuel Cells. 2019;19(5):515–29.
    CrossRef
  61. International Council on Clean Transportaion. Developing hydrogen fueling infrastructure for fuel cell vehicles: A status update. 2017;(October):1–22.
  62. Dawood F, Anda M, Shafiullah GM. Hydrogen production for energy: An overview. Int J Hydrogen Energy [Internet]. 2020;45(7):3847–69. Available from: https://doi.org/10.1016/j.ijhydene.2019.12.059
    CrossRef
  63. Ballard C. UK OLEV in £23m boost for hydrogen vehicles, infrastructure. Fuel Cells Bull. 2017;2017(4):11–2.
    CrossRef
  64. Luo C, Xie H, Wang Q, Luo G, Liu C. A review of the application and performance of carbon nanotubes in fuel cells. J Nanomater. 2015;2015.
    CrossRef
  65. Oi T, Wada K. Feasibility study on hydrogen refueling infrastructure for fuel cell vehicles using the off-peak power in Japan. Int J Hydrogen Energy. 2004;29(4):347–54.
    CrossRef
  66. Jourdani M, Mounir H, El Marjani A. Compilation of factors affecting durability of proton exchange membrane fuel cell (PEMFC). Proc 2014 Int Renew Sustain Energy Conf IRSEC 2014. 2014;542–7.
    CrossRef
  67. Borgstedt P, Neyer B, Schewe G. Paving the road to electric vehicles – A patent analysis of the automotive supply industry. J Clean Prod [Internet]. 2017 Nov;167:75–87. Available from: https://linkinghub.elsevier.com/retrieve/pii/S0959652617318905
    CrossRef
  68. ARUP. Establishing a Hydrogen Economy: The future of energy 2035. 2018;
  69. Üçok, Mehmet Doğan (IICEC/SABANCI UNIVERSITY). Iicec Energy and Climate Research Paper Hydrogen Fuel Cell Vehicles. 2019;(August).
  70. APERC Asia-Pacific Economic, Cooperation. Perspectives on hydrogen in the APEC region 2018. 2018.
  71. Agency IE. Learning from 19 plans to advance hydrogen from across the globe. 2019;(Iea):6–7.
  72. Whiston MM, Azevedo IL, Litster S, Whitefoot KS, Samaras C, Whitacre JF. Expert assessments of the cost and expected future performance of proton exchange membrane fuel cells for vehicles. Proc Natl Acad Sci U S A. 2019;116(11):4899–904.
    CrossRef
  73. Shen G, Liu J, Wu H Bin, Xu P, Liu F, Tongsh C, et al. Multi-functional anodes boost the transient power and durability of proton exchange membrane fuel cells. Nat Commun. 2020 Dec;11(1).
    CrossRef
  74. Chen H, Song Z, Zhao X, Zhang T, Pei P, Liang C. A review of durability test protocols of the proton exchange membrane fuel cells for vehicle. Appl Energy [Internet]. 2018;224(November 2017):289–99. Available from: https://doi.org/10.1016/j.apenergy.2018.04.050
    CrossRef
  75. Borup RL, Davey J, Wood D, Garzon F, Inbody M. DOE Hydrogen Program FY 2005 Progress Report – VII.I.3 PEM Fuel Cell Durability. 2005;1039–45.
  76. Kurtz J, Sprik S, Saur G, Onorato S. Fuel Cell Electric Vehicle Durability and Fuel Cell Performance. 2018;(March). Available from: www.nrel.gov/publications.
    CrossRef
  77. Beurey C, Gozlan B, Carré M, Bacquart T, Morris A, Moore N, et al. Review and Survey of Methods for Analysis of Impurities in Hydrogen for Fuel Cell Vehicles According to ISO 14687:2019. Front Energy Res [Internet]. 2021 Feb 24;8. Available from: https://www.frontiersin.org/articles/10.3389/fenrg.2020.615149/full
    CrossRef
  78. Zhao J, Li X. A review of polymer electrolyte membrane fuel cell durability for vehicular applications: Degradation modes and experimental techniques. Energy Convers Manag [Internet]. 2019;199(June 2019):112022. Available from: https://doi.org/10.1016/j.enconman.2019.112022
    CrossRef
  79. Kim H, Eom M, Kim BI. Development of strategic hydrogen refueling station deployment plan for Korea. Int J Hydrogen Energy [Internet]. 2020;(xxxx). Available from: https://doi.org/10.1016/j.ijhydene.2020.04.246
    CrossRef
  80. Kaya K, Hames Y. Two new control strategies: For hydrogen fuel saving and extend the life cycle in the hydrogen fuel cell vehicles. Int J Hydrogen Energy. 2019;44(34):18967–80.
    CrossRef
  81. Teng T, Zhang X, Dong H, Xue Q. A comprehensive review of energy management optimization strategies for fuel cell passenger vehicle. Int J Hydrogen Energy. 2020;(xxxx).
    CrossRef
  82. Muthukumar M, Rengarajan N, Velliyangiri B, Omprakas MA, Rohit CB, Kartheek Raja U. The development of fuel cell electric vehicles – A review. Mater Today Proc. 2020;(xxxx).
    CrossRef
  83. Gaikwad SD, Ghosh PC. Sizing of a fuel cell electric vehicle: A pinch analysis-based approach. Int J Hydrogen Energy. 2020;45(15):8985–93.
    CrossRef
  84. IEA. The Future of Hydrogen for G20. Seizing today’s opportunities. Rep Prep by IEA G20, Japan. 2019;(June).

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

About The Author